Filter
Top Products
DR-3010C
DR-3010C
51
This section describes the procedure for setting to omit borders and ruled lines
of a specified color (red, green, or blue) from the scanned image.
NOTE
If you select [24-bit Color] or [Auto Color Detection] from the Mode drop-down list
in the [Basic] tab, you cannot specify this setting.
1
Click the [Image processing] tab in the Properties for Canon DR-3010C
dialog box → select the color to omit from the Front and Back drop-down
lists under <Color drop-out> → click [OK].
NOTE
You can specify different settings for the front and back side of the document.
This section describes the procedure for setting the scanner to enhance the
color red when performing black-and-white scanning.
NOTE
If you select [24-bit Color] or [Auto Color Detection] from the Mode drop-down list
in the [Basic] tab, you cannot specify this setting.
1
Click the [Image processing] tab in the Properties for Canon DR-3010C
dialog box → select [Red Enhance] from the Front and Back drop-down
lists under <Color drop-out> → click [OK].
NOTE
You can set specify different settings for the front and back side of the document.
Omitting a Specific Color Enhancing the Red Color