Filter
Top Products
Before Using the Scanner 15
Chapter 1
4. Installation Requirements
To use the DR-6030C, your computer must satisfy the following system
requirements.
• One of the following operating systems:
- Microsoft Windows XP Professional SP3 or later
- Microsoft Windows XP Home Edition SP3 or later
- Microsoft Windows XP Professional x64 Edition SP2 or later
- Microsoft Windows Vista Home Basic SP2 or later
- Microsoft Windows Vista Home Premium SP2 or later
- Microsoft Windows Vista Business SP2 or later
- Microsoft Windows Vista Ultimate SP2 or later
- Microsoft Windows Vista Enterprise SP2 or later
- Microsoft Windows 7 Home Premium x32 Edition/x64 Edition
- Microsoft Windows 7 Professional x32 Edition/x64 Edition
- Microsoft Windows 7 Ultimate x32 Edition/x64 Edition
• A computer that meets the following specifications:
- CPU: Celeron M, 1.4 GHz or faster
- Memory: 512 MB or more
- Hard disk: 1 GB or more available space
- USB interface or SCSI board
- Monitor: Resolution of 1024 × 768 (XGA) or better recommended.
• USB interface complies with the following:
- Hi-Speed USB 2.0/USB Full-Speed (equal to USB 1.1)
• Use the following recommended SCSI cards with the scanner.
SCSI cards made by Adaptec (for PCI bus)
- AVA - 2 9 1 5 LP
- AVA - 2 9 3 0 LP
SCSI card made by RATOC Systems (for Card bus)
- REX-CB31
• An ISIS-compatible application or a TWAIN-compatible application that is
compatible with the above operating systems.
IMPORTANT
• If you do not know the requirements for your computer system, contact the
store where you purchased the computer or the manufacturer of the
computer for more information.
• Do not connect both a USB interface and a SCSI card at the same time.
• Note the following points when using the USB interface that was provided
as standard with your computer.
- Use the most recently available USB 2.0 driver provided by Microsoft.
Contact your local authorized Canon dealer for more detailed
information.