Canon DR-6030C Scanner User Manual


 
20 Using the Scanner
1. Documents
This scanner can scan documents ranging in size from business cards and
checks to A3 size documents. It can also scan business cards.
The size of documents that this scanner can scan is shown below.
(*1) For information about the output directions, see “Document Eject Tray,”
on p. 23.
(*2) You can scan documents that are a maximum of 118.1 inches (3000 mm)
long by setting the scanner in the Long document mode. (See “Long
Document Mode,” on p. 55.)
(*3) For information about feeding a document, see “Placing Documents,” on
p. 27.
IMPORTANT
A document must meet the following criteria to be scannable:
When scanning a multipage document, pages must be grouped together so
that they have the same size, thickness, and weight. Scanning different types
of paper at one time can cause the scanner to jam.
Scanning documents before the ink is dry can cause problems with the
scanner. Always make sure that the ink on a document is dry before scanning
it.
Eject Direction (*1) U-Turn Path Straight Path
Width 2.08" to 11.8"
(53 mm to 300 mm)
2.08" to 11.8"
(53 mm to 300 mm)
Length (*2) 2.75" to 17"
(70 mm to 432 mm)
2.75" to 17"
(70 mm to 432 mm)
Weight (*3)
Feeding
documents are
separated
Feeding
documents are not
separated
14 to 32 lb bond
(52 to 128 g/m
2
)
0.0024" to 0.0059"
(0.06 mm to 0.15 mm)
11 to 40 lb bond
(42 to 157 g/m
2
)
0.0020" to 0.0079"
(0.05 mm to 0.20 mm)
11 to 32 lb bond
(42 to 128 g/m
2
)
0.0020" to 0.0059"
(0.05 mm to 0.15 mm)
11 to 144 lb bond
(42 to 546 g/m
2
)
0.0020" to 0.0026"
(0.05 mm to 0.66 mm)
Business Cards Cannot be scanned Can be scanned
(not separated)
Size: 2.12" × 3.37"
(53.9 mm × 85.5 mm)
Thickness: 0.03" ± 0.003"
(0.76 ± 0.08 mm)
without embossing