Filter
Top Products
92 Software Setup
2. Practical Examples
This section provides examples of settings for the DR-6030C ISIS/TWAIN driver.
Refer to these examples when making ISIS/TWAIN driver settings. For
descriptions of particular setting items, see “ISIS/TWAIN Driver Properties
Dialog Box,” on p. 64.
Scanning Both Sides of Pages
• To scanning both sides of pages
Select [Duplex] for the Scanning Side setting on the [Basic] tab sheet. (See
“Scanning Side,” on p. 69.)
• To avoid scanning blank pages, such as pages at the back of a
document
Select [Skip blank page] for the Scanning Side setting on the [Basic] tab sheet.
Duplex scanning is performed, and pages images detected as blank are not
saved. (See “Scanning Side,” on p. 69.)
• If blank pages are not skipped, even when [Skip blank page] is
selected
Increase the [Content density] in the [Blank Skip Setting] dialog box. If the
[Content density] is set too low for documents with a light background, they
may not be detected as blank pages, and not be skipped. (See “Scanning Side,”
on p. 69.)
• If documents with text are skipped as blank pages
Decrease the [Content density] in the [Blank Skip Setting] dialog box. If the
[Content density] is set too high for documents with little text, they may be
incorrectly detected as blank pages, and be skipped. (See “Scanning Side,” on
p. 69.)