Canon DR-7580 Scanner User Manual


 
49
4
5
Place the remainder of the document face up in the document tray,
aligning the document’s top edge against the back of the document
tray.
6
The document tray rises, and scanning begins. When scanning
ends, the document tray is lowered.
If the scanning mode is set to “Automatic Feeding,” then scanning will start
automatically when the sensor on the document tray shown below detects the
document.
After instructing the scanner to start, if something is placed over the sensor, it will
mistakenly recognize it as a document and start scanning. Do not place anything
other than documents over the sensor.
Sensor
Dust on the sensor will cause false recognition. Clean the sensor periodically.
(See “Cleaning the Document Detection Sensor,” on p.81.)
7
If there are more documents to scan, place the document, and
scanning begins automatically. To end scanning, press the [Stop]
key.
CAUTION
4.2 Document Feeding and Scanning