Filter
Top Products
6
1. Introduction
Top Features
POWER
VIDEO S-
VIDEO
COMPUTER-1 COMPUTER-2
WARNING
LAMP REPLACE
AUTO PC
VOL
-
VOL
+
12 13
10 2 3 411
1567 8
9
1. POWER Button ( )
Use this button to turn the power on and off when the
main power is supplied and the projector is in standby
mode.
To turn on the projector, press and hold this button for
a minimum of two seconds. To turn off the projector,
press this button twice.
2. POWER Indicator
When this indicator is green, the projector is on; when
this indicator is orange, it is in standby mode. See the
Power Indicator section on page 52 for more details.
3. WARNING Indicator
If this light blinks red rapidly, it indicates that an error
has occurred, the lamp cover is not attached properly
or the projector has overheated. If this light remains
orange, it indicates that you have pressed a cabinet
key while the Key lock is enabled. See the WARNING
Indicator section on page 52 for more details.
4. LAMP REPLACE Indicator
If this light blinks red rapidly, it's warning you that the
lamp has reached the end of its usable life. After this
light appears, replace the lamp as soon as possible
(See page 49). If this is lit green continually, it indi-
cates that the lamp mode is set to Quiet. See the Lamp
Indicator section on page 52 for more details.
5. VIDEO Button
Press this button to select a video source from a VCR,
DVD player, laser disc player or document camera.
6. S-VIDEO Button
Press this button to select an S-Video source from a
VCR, DVD player, laser disc player or document cam-
era.
7. COMPUTER-1 and -2 Buttons
Press this button to select an RGB source from com-
puter or component equipment connected to your
ANALOG IN-1 or -2 port.
8. AUTO PC Button
Use this button to adjust an RGB source for an opti-
mal picture (See page 27).
9. Source Indicators
When one of the ANALOG IN-1/-2, VIDEO or S-VIDEO
input is selected, the corresponding source indicator
lights.
10. MENU Button
Displays the menu.
11. SELECT
/ VOL (+/–) Buttons
: Use these buttons to select the menu of the
item you wish to adjust.
: Use these buttons to change the level of a se-
lected menu item. A press of the
button ex-
ecutes the selection. When no menus appear,
these buttons work as a volume control.
12. OK Button
Executes your menu selection and activates items
selected from the menu.
13. BACK Button
Pressing this button will return to the previous menu.
While you are in the main menu, pressing this button
will close the menu.