Filter
Top Products
42
5. Using On-Screen Menu
3. Type in the same combination of SELECT buttons and press the OK button.
The confirmation screen will be displayed.
4. Select “Yes” and press the OK button.
The Password function has been enabled.
To disable the Password function:
1. Select [Advanced settings]
→
[Password] and press the button to select “Off”.
2. Type in your password and press the OK button.
When the correct password is entered, the Password function will be disabled.
When the Password function is enabled and the projector is turned on, the projector will display a blue
background.
To display an image at this time, press the MENU button to display the Password input screen.
The Password confirmation screen will be displayed.
Type in the correct password and press the OK button. The projector will display an image.
NOTE:
• The password disable mode is maintained until the main power is turned off (by setting the main power switch to “O” or
unplugging the power cord).
• If you forget your password, contact your dealer.