Canon RE-350 Projector User Manual


 
E
10
Storing
Put the lens cap to the lens.
Direct the camera head sideways until it stops.
Hold the arm with your right hand and press
the arm lock release lever, then pull the arm
down to the document table very carefully.
Fold the pair of illumination lamps very carefully.
Fold the left-hand illumination lamp first, then the right-hand
illumination lamp (
).
1
2
3
4
Be sure to turn the power OFF before storing the unit.
Put the supplied unit cover on the RE-350 when the unit is not in use. The unit
cover has a pocket to store cords.
MEMO
Place the unit horizontally when storing it. If the unit is stored
vertically, it may fall down and cause injury or malfunction. When
carrying the unit, turn the power OFF, disconnect the cords, fold the
arm and the illumination lamps, and pull out the carrying handle.
Do not touch the fluorescent lamps after the
illumination lamps are turned off, as they may still
be hot.
NOTICE
CAUTION
CAUTION
Be sure to hold the arm with your right hand, then press the
arm lock release lever.
NOTICE
Arm lock release lever