Filter
Top Products
Casio 140CR
Setup and Programming Steps
Cash Register Support
011-314 8888
SETUP
1. Turn PGM key to PGM mode
2. Plug in Cash Register into wall socket
3. Open the printer lit and insert batteries under the paper roll
a. Batteries are not supplied with Cash Register
4. Feed the paper in to do printer and close the lit
SETUP TIME AND DATE
1. When the display shows blinking “ 0 “ enter the data – Day – Month – Year
2. e.g 070101
3. After above step it will go over to Time mode
4. Type in the time e.g. 1300
5. This is a 24 hours system mode
6. Now Date & Time is set
NB: By pressing AC/C key, this procedure returns one by one
OPERATING 140CR
1. Turn mode switch to REG
2. Type in the amount of the sold item and press the department button 1-5
3. If you are done with the sale press subtotal and then total will be on screen.
4. Type in the amount that the customer gives you and press cash.
5. This will finalize your transaction.