Filter
Top Products
Parameter Description
PoolName The name ofthe pool.The poolname ismandatoryand shouldfollow hostname
guidelines,not exceed 64charactersandstart witha letter.
TCPPort
Alias
The TCP Port Aliaswhere thepoolresponds.Thisparameter isoptional.
PoolIPv4
Alias
The IPv4addressusedbythe pool.Thisparameter isoptional.
PoolIPv4
Alias
Interface
The interface(Eth0) usedbythe IPv4Alias.
PoolIPv6
Alias
The IPv6addressusedbythe pool.Thisparameter isoptional.
PoolIPv6
Alias
Interface
The interface(Eth0)usedbythe IPv6Alias.
Table 3.6: Pool of CAS Ports Parameters
Authentication
Authentication can be performed locally, with OTP, or on a remote Kerberos, LDAP, NIS,
Radius or TACACS+ authentication server. If the virtual console server is managed by a
DSView 3 server, DSView authentication is also supported. The virtual console server also
supports remote group authorizations for LDAP, Radius and TACACS+ authentication
methods.
Fallback mechanisms of the following types are available:
Local authentication can be tried first, followed by remote, if the local authentication fails
(Local/Remote_Method).
-or-
Remote authentication may be tried first, followed by local (Remote_Method/Local).
-or-
Local authentication may be tried only if a remote authentication server is down (Remote_
Method_Down_Local).
An administrator can configure authentication using the CLI utility or the web manager. The
default authentication method for the virtual console server and the serial ports is Local. Any
Chapter 3: Accessing a Virtual Console Server via the Web Manager 35