Casio ACS V6000 Personal Computer User Manual


 
4. Enter your secret word or passphrase in the Secret field (applies to both first and second
authentication and accounting servers), then re-enter the secret word or passphrase in the
Confirm Secret field.
5. Enter the desired number of seconds for server time-out in the Timeout field.
6. Enter the desired number of retries in the Retries field.
7. If you select the Enable Service-Type attribute to specify the authorization group
checkbox, enter the authorization group name for each of the following Service Types:
Login, Framed, Callback Login, Callback Framed, Outbound and Administrative.
8. Click Save.
To configure a TACACS+ authentication server:
1. Select Authentication - Authentication Servers - TACACS+.
2. Enter the IP addresses for the First Authentication Server and First Accounting Server.
3. If used, enter the IP addresses of the Second Authentication Server and Second Accounting
Server.
4. Select the desired service (PPP or raccess) from the Service drop-down menu.
5. Enter your secret word or passphrase in the Secret field (applies to both first and second
authentication and accounting servers), then re-enter the secret word or passphrase in the
Confirm Secret field.
6. Enter the desired number of seconds for server time-out in the Timeout field.
7. Enter the desired number of retries in the Retries field.
8. If you select the Enable User-Level attribute to specify the authorization group checkbox,
enter the authorization group name for up to 15 User-Levels.
9. Click Save.
To configure an LDAP(S)|AD authentication server:
1. Select Authentication - Authentication Servers - LDAP(S)|AD.
2. Enter the IP address of the server.
3. Enter the Base.
4. At the Secure drop-down menu, select Off, On or Start_TLS.
5. Enter the Database User Name.
Chapter 3: Accessing a Virtual Console Server via the Web Manager 37