Filter
Top Products
24
Option Settings 1 Main Menu
Setting Name Input
Setting
Unit
Description
Menu Position RCVUN Single Use this sub-menu to specify the display position of the
setup menu as either the center or the left side of the
screen.
*:
Select this option to display the setup menu in the center
of the screen.
:
Select this option to display the setup menu on the upper
left corner of the screen.
Auto Keystone
Correction
RCVUN Single Use this sub-menu to turn auto keystone correction on or
off.
On*:
Select this option to turn on auto keystone correction.
Off:
Select this option to turn off auto keystone correction.
Auto Adjust RCVUN Single Use this sub-menu to specify whether or not auto adjust
should be performed when RGB is selected as the input
source.
On*:
Select this option to turn on auto adjust.
Off:
Select this option to turn off auto adjust.
Eco Mode RCVUN Single Use this sub-menu to turn the Eco Mode on or off.
On:
Select this option to reduce lamp brightness and save
power. This setting also reduces the speed of the
projector’s cooling fan, which reduces operation noise.
Off:
Select this option to project at maximum brightness.
Auto Power
Off
RCVUN Single Use this sub-menu to turn Auto Power Off on or off. See
“Turning Off the Projector” in the “User’s Guide (Basic
Operation)” for more information.
On*:
Select this option to turn on Auto Power Off.
Off:
Select this option to turn off Auto Power Off.
Power On
Password
RCVUN Single You can configure the projector to require input of a
password before operation is enabled. For details, see
“Password Protecting the Projector” on page 13.