Casio DSC9148D8G16PK9 Switch User Manual


 
6
Send documentation comments to mdsfeedback-doc@cisco.com
Figure 6 Power Receptacle and On/Off Switch on Cisco MDS 9148 Switch
274885
AC power
receptacle
On/Off
switch
6 Setting Up a Network
To set up a network, follow these steps:
Step 1 Ensure that the Mgmt0 port is connected to the management network.
Step 2 Ensure that the console port is connected to the PC serial port (or to a terminal server), as shown in Figure 7. For
example, on a Windows PC used as a terminal emulator, you can use HyperTerminal. The default baud rate on the
console port is 9600.
Figure 7 Connection to Terminal Emulator.
Teminal
emulator
1
81541
Console port
Note See Figure 1 for the physical location of the Mgmt 0 port and console ports.