Filter
Top Products
G486VPB
49
The Primary and Secondary Serial Ports
on the G486VPB System Board
Parallel Port
The G486VPB system board has a standard connector
for interfacing your PC to a parallel printer. This port is
compatible with both IBM AT printer ports and the new,
high speed, bi-directional Extended Capabilities Port
standard. The parallel port on your system board can be
set to any of the following system I/O addresses:
* Default setting
Port Configuration I/O Address
LPT1 3BC-3BE Hex
LPT2* 378-37A Hex
LPT3 278-27A Hex