Filter
Top Products
D) Turn to the “REG” position. Install the supplied 58mm paper roll
placing the paper roll into the printer well. Insert the paper into the
inlet and press
l
key to set the paper.
E) Proceed to the Next step “Setting the Date and Time”.
Prepare the tax rate of your state. If your tax table has break point, refer to page 24 of the
user’s manual.
Input the desired fl at tax rate to the appropriate department key.
A) Turn the key to the “PGM” position.
B) Press the
~
key.
C) Enter tax rate.
(Example: For 6% enter “6”, 5.75% enter “5.75”.)
D) Press the appropriate department key.
E) Repeat step C) and D) to set other department key.
F) Press the
s
key to end tax programming.
Note: In case of setting the wrong tax rate to the key, please enter
?
and press those depart-
ment keys above, and quit this procedure by pressing
k
key, and start from the begin-
ning of this procedure.
Please start with the department 2 key (taxable department). Department 1 key is initial-
ized as non taxable.
Quick Start Guide
Casio Model Numbers PCR-272, 140CR
For Programming Assistance Please Call
TOLL FREE 1-800 638-9228
Also, visit http://casio4business.com/sa/support/index_support.html
2
3
4
Initialize Your Cash Register
(See Page 9 in the User’s Manual)
Setting the Date and Time
(See Page 11 in the User’s Manual)
Setting Tax Rates
(See Page 11 in the User’s Manual)
Please keep this sheet for future reference.
A) Insert the supplied key and
turn to the “OFF” position.
PGM
B) Plug the power cord into an AC outlet.
REG
OFF
RF
PGM
CAL X
Z
PGM
REG
OFF
RF
PGM
CAL X
Z
PGM
~
N S
N D
k
Start tax program
Enter tax rate and press dept key.
Enter tax rate and press dept key.
To end the setting.
Example1: Set state tax 6% to department 2, 3 key
5
Quick Start Setup Completed!
QSG260*ES 0812-A
1
Load the Memory Protection Batteries and Paper Roll
(See Page 9 - 10 in the User’s Manual)
A) Remove the printer cover. B) Open battery compart-
ment cover.
C) Insert 3 new “AA” type batteries
in to the compartment.
66
To prevent to lose all of your setting and sales data, we
recommended you to install the memory protection bat-
teries.
IMPORTANT Be sure that the plus (+) and minus (-) ends of the batteries
are facing in the directions indicated the illustration inside the
battery compartment.
No battery is included in the accessories.
REG
OFF
RF
PGM
XCAL
Z
~
B
"B
S
M D
k
Start tax program
Enter tax rate and press dept key.
Enter tax rate and press dept key.
To end the setting.
Example 2: Set state tax 5.5% to department 2 key and tax
7% to department 3 key
A) Using the key marked “PGM” turn
the key to the “PGM” position.
B) When the display shows blinking
“0”, such as
00-00-00
, enter
current date in Month, Day, Year
order.
Example: January, 8, 2010,
enter
?Z?<Z?
•
Enter 6-digit, last 2 digits for year set.
(2010 –>10)
•
By pressing
y
key, this procedure
returns one by one.
C) When the display shows blinking
“0”, such as
00-00
, enter
current time in Hour, Minute order.
Example: 1:18 PM, enter
ZCZ<
.
• Enter 4-digit, use 24-hour system.
•
By pressing
y
key, this procedure
returns one by one.
• If you want to adjust the date/time,
please refer to page 31 of the User’s
Manual.
00-00
10-00
13-00
13-10
13-18
~00
00-00-00
00-00-00
01-00-00
01-00-00
01-08-00
01-08-10
01-08-10
66
REG
OFF
RF
PGM
CAL
Z
X