Filter
Top Products
E-48
Advanced programmings and registrations
Advanced registrations
Enabling clerk assignment
By assigning a clerk, clerk number or name will be printed on receipts. The fol-
lowing operation enables the register to use the clerk assignment.
Step Operation
1 Turn the Mode switch to PGM position. The display shows
programming top menu.
2 Using ? and > keys, select [System Setting] and press
F key. [System Setting] is the last column on the pro-
gramming top menu and is not shown on the rst screen.
Keep pressing > key until it appears on the screen.
3 Enter 3 from ten key pad then press o key. This
operation sets the register in program mode.
3o
4 Enter 2722 from ten key pad and press o
key. Number 2722 is the program code for clerk assign-
ment setting.
2722o
5 Enter 4 and eight zeros from the ten key pad then press
F key. Number 400000000 is the set code to enable
clerk assignment.
If you wish to disable the clerk assignment feature later on,
perform these steps and enter nine zeros in this step.
400000000F
6 Press o key to complete the setting.
o
You can also program for enabling clerk operations by detail setting program. Please see page
E-75 “Set code 27”.