Filter
Top Products
49
4
Place the document whose image you want to project onto the document
camera’s document stage.
z Be sure to place the document in the center of the
stage, and do not let any part of the document
extend off the edges of the stage.
z When placing a landscape orientation document onto
the document stage, the top of the page should face
towards the camera stand.
z Initially the monitor image will be projected, and so
the image will appear a bit fuzzy.
z When the document camera senses that the document on the stage is not being moved,
it will record its image and switch from the fuzzy monitor image to a high-resolution
image (recorded image) automatically.
5
Now you can replace the document currently on the stage with another one.
z This will switch to the recorded image of the next document automatically.
Note
Step 5 above is what happens while the Data Projector’s YC Camera application is
configured with its initial default settings. The recorded image will not switch
automatically if you have changed the “Operation Mode” setting of the YC Camera
application to “Manual Capture”. For more information, see “YC Camera Application
Setup Menu Contents” on page 57.
Rough (Monitor) Image Recorded Image