Filter
Top Products
32
3.
Use the [
T
] key to move the highlighting to “Wireless info” and then press the
[ENTER] key.
z This will display the wireless info dialog box.
4.
To close the wireless info dialog box, press the [ESC] key.
To initialize the network settings
1.
While the Wireless screen is being projected, press the [MENU] key.
2.
Use the [
T
] key to move the highlighting to “USB” and then press the [ENTER]
key.
3.
Use the [
T
] key to move the highlighting to “Initialize Network Settings” and then
press the [ENTER] key.
z This will cause a “Do you want to initialize network settings?” confirmation dialog box to
appear.
4.
Press the [
S
] key to move the highlighting to “Yes” and then press the [ENTER]
key.
z This returns all projector network settings (all settings on the System Admin page) to their
initial defaults. For details, see “System Admin Page Settings” (page 37).
Display Item Description
SSID Projector’s current SSID.
Login Code Projector’s current login code. For more information, see “Wireless Standby
Screen” (page 13).
IP Address Projector’s current IP address.
DHCP Projector’s current DHCP setting status (“Auto” or “Disable”).
Security Setup Projector’s current security setting.