Filter
Top Products
36
Option Settings 2 Main Menu
Language
RCVHDUN
Single Use this sub-menu to specify the language to use for messages,
setup menus, etc.
English / French / German / Italian / Spanish / Swedish /
Portuguese / Turkish / Russian / Chinese (Simplified) /
Chinese (Traditional) / Korean / Japanese
Note
(for USB port model users)
If you have Portuguese, Turkish, or Russian selected as the
projector’s language, selecting an external device connected
to the projector’s USB-A port as the input source will cause
some menus and messages to be displayed in English.
Restore Menu
Defaults
RCVHDUN
Single This sub-menu returns all of the sub-menu items on the Option
Settings 1 main menu to their initial default settings.
z The language setting and the password are not returned to their
initial factory defaults.
z The “Auto Adjust” item is returned to its initial default only when
RGB input is selected for the input source. All of the other items
are returned to their initial defaults regardless of the currently
selected input source.
Setting Name Input Setting Unit Description
Pointer
RCVHDUN
Single Use this sub-menu to specify the type of pointer that appears first
when you press the [POINTER] key.
Plug and Play
(USB port
models only)
RCVHDUN
Single Use this sub-menu to turn plug-and-play
*1
on or off.
On*:
Select this option to turn on plug-and-play. This will allow the
projector detect when an external USB device is connected and
make that device the input source automatically.
Off:
Select this option to turn off plug-and-play.
Note
Regardless of the setting of this item, plug-and-play is
disabled while the projector is in the 3D input mode (“3D Input
Mode”, page 11) or “On” is selected for the “Option Settings 2
J Interactive Pointer” setting.
Audio Out
RCVHDUN
Single Specifies whether the input audio signal should be output from the
projector’s built-in speaker or to the line output.
Speaker*:
Outputs the audio signal being input to the projector from the
speaker.
Line:
Outputs the audio signal being input to the projector from the
AUDIO OUT terminal.
Setting Name Input Setting Unit Description
D