CH Tech PX454S Network Card User Manual


 
Rev. A
C&H Technologies, Inc. 445 Round Rock West Drive Round Rock, TX 78681-5012
(512) 733-2621 FAX (512) 733-2629 www.chtech.com
Resolution:
10 Hz sampling: 22.5 bits
50/60 Hz sampling: 20 bits
1 KHz sampling: 11 bits
Input Connector: 5W5S DSUB
Airflow (min): 10m
3
/h
Temperature:
Operating: 0°C to 60°C
Storage: -20°C to 70°C
Power: +5V @ 1.1 A with DC/DC
CPCI/PXI Compliance
Complies with PCI spec. 2.0 R3.0
and PCI spec 2.2
5V and 3.3V signaling voltage (VIO)
supported
5V only power supply
33MHz PCI data bus
Five trigger lines compliant with PXI
Specification 2.1
Form Factor: Size 3U
Applications
DMM Instrument Functions
Factory Test
Ordering Information
Part Number 11030230-0001
Additional Information
User Manuals for C&H carriers and
this module can be found on our
website at
www.chtech.com
.
Specifications:
General Characteristics:
DC or AC voltage and current
2 or 4 wire resistance measurement
Up to 22 bits accuracy (6.5 digits)
Max. resolution of 50nV, 5nA, 50_Ω
DC Voltage: ±125 mV to ±500V
DC Current: ±12.5mA to ±2.5A
AC V
rms
: 250mV to 250V
AC I
rms
: 25mA to 2.5A
Ohms: 0 to 250Ω to 2.5MΩ
True RMS measurements
Auto calibration
PX454S
Digital
Multimeter
Module
The PX454S is a full function DMM
suitable for use on a variety of
platforms with the family of C&H
carriers. This DMM is based upon a
24 bit Sigma-Delta A/D converter
with on-chip notch filter. This
technology allows sampling
frequencies (or filter frequencies)
between 10 Hz and 1 KHz providing
varying resolutions. The core
measurement section is optically
isolated and shielded.
This unit also features a position for
adding one single-wide M-Module.