Filter
Top Products
C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX 78681-5012
(512) 733-2621 • FAX (512) 733-2629 • www.chtech.com
Delay Timing (from Trig
Out):
Range 25ns to 1 sec
Resolution 25ns min, 10bits
Accuracy
+
15ns
Trigger Out: TTL, 10 gate drive
Capability
Trigger/Gate In: TTL
Temperature:
Operating 0˚C to +50˚C
Storeage -40˚C to 65˚C
Power: +5V @3A
+12V @ 0.4A
Ordering Information:
Description Part Number
VX462B 11026335-0001
VXIbus Compliance
Complies with ANSI/IEEE Std. 1014-
1987 IEC 821, IEC 822 and VXIbus
Rev 1.4.
A16:D16 DTB Slave
Register Based
No SYSFAIL
No Interrupts
IACKIN tied to IACKOUT
BRX tied to BGX
Form Factor: Size B
Built in test via feedback registers
Applications
• Pulse Generator
• Square Wave Generator
• Clock Source
• Delayed Trigger
Specifications:
Pulse Repetition Interval:
Range 50ns to 1 sec
Resolution 25ns min, 10bits
Accuracy
+
15ns
Pulse Width:
Range 25ns to 1 sec
Resolution 25ns min, 10bits
Accuracy
+
15ns
Output characheristics:
Amplitude
+
10V into 50Ω
(low out impedance)
+
5V into 50Ω
(50Ω out impedance)
Accuracy
+
1%Pgm value,
+
3% of amplitude,
+
100mv
Transition Time 5ns typical
(@ 5V) (fixed)
Impedance 2-5Ω or
50Ω (selectable)
VX462B
Pulse Generator
Module
The VX462B is a 20Mhz pulse
generator with additional 40Mhz
square wave capability. Its
operating modes are Normal,
Triggered, Gated, Delayed pulse
and Double Pulse (second pulse
occurs “delay” time after Trigger
Out). Front panel BNC connectors
are provided for Pulse Out, Trigger
Out and Trigger (& Gate) In. LED
indicators are provided for MODID
and RUN. The unit is jumpter
selectable for low output impedance
capable
+
10V into a 50Ω load or
50Ω output impedance that provides
better matching for 50Ω loads at
drive levels up to
+
5V.