Filter
Top Products
Christie’s Matrix Series –
Synonymous with Simulation
Christie’s new Matrix Series simulation solutions are purpose-built
projectors designed to meet the specific requirements of the simulation
market. As technologies change and the demands of the simulation and
training markets increase, the need for lower cost simulation systems
with higher resolution and higher brightness is prevalent.
The Matrix 3500 is a purpose-built 3-chip 1.8" LCD UXGA high
performance, high brightness simulation projector. The brightest in the
series, the Matrix 3500 projects 3500 ANSI lumens for bright, vibrant
images in daytime simulation environments and full ambient light. Images
on-screen are displayed in 1600x1200 UXGA resolution for phenomenally
crisp, detailed realistic graphics. The Super CR™ 1000:1 full field contrast
ratio ensures the accurate reproduction of night-mode simulation.
The Matrix 3500 also features broad source compatibility and connects to
virtually every computer or video source. With Minimum Processing
Latency (MPL™), less than one frame delay enables extremely fast
simulator response time to user’s commands providing sharp, vibrant
images without loss of detail, flicker or motion artifacts.
The Matrix 3500 is quick to set up with an intuitive GUI and virtual plug
and play operation with a universal power supply that auto adjusts.
Christie’s Digital Color Management (DCM™) system offers a specially
designed optical system with very tight tolerance for primary colors and
together with the Custom Gamma Adjustment (CGA™) ensures the true
color representation, color matching and uniformity across multi-screen
images in simulation applications.
The Matrix 3500 features Color Select Filter (CSF™) to ensure all three
colors are identically polarized. Two stacked Matrix 3500 units can be
used either with linear or circular polarization kits for passive stereo
applications.
Featuring four 100W UHP™ lamps with 8000 hours of typical lamp life
(16000 hours in dual lamp mode and sequential lamp operation) the
Matrix 3500 provides reliability, failsafe operation and a lower power
consumption for lower cost of ownership. The ruggedized design
withstands 3G vibrations in all three axes making Christie’s Matrix 3500
the reality in simulation.
APPLICATIONS
• 3500 ANSI lumens
• SuperCR™: 1000:1 on/off contrast ratio
• True UXGA resolution (1600x1200)
• Digital Color Management (DCM™) for RGB color matching
across multiple screens
• Custom Gamma Adjustment (CGA™)
• Minimum Processing Latency (MPL™) of less than one frame
• Remote diagnostics and control via RS232
• ChristieNET™ networking
• Four 100W UHP™ lamps with 8,000 hrs of rated lamp life
(16,000 hours in dual lamp operation)
• Lamp Power Management (LPM™) system
• Color Select Filter (CSF™) ensures that RGB colors are in the
same polarization plane
• Designed for linear or circular passive stereo applications in
stacked configuration
• Wide range of optional fixed and zoom lenses, input modules
and accessories
• Universal 90 to 260 V AC for world-wide operation
• 3G operating vibration specification in all three axes
• Aircraft, ship’s bridge and
land vehicle simulators
• Driver training
• Air Traffic Control simulators
• Design simulators
• Architecture, engineering
and construction
• Research and development
• Military training
• Entertainment
Matrix
3500