Cisco Systems 10BASE-FL Network Card User Manual


 
1
Cisco Systems, Inc.
All rights reserved.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Cisco Systems, Inc.
Corporate Headquarters
Copyright © 1998
Text Part Number:
PA-5EFL Ethernet 10BASE-FL
Port Adapter Installation and
Configuration
Product Numbers: PA-5EFL and PA-5EFL=
Introduction
This configuration note describes the installation and configuration of the Ethernet 10BASE-FL port
adapter (PA-5EFL[=]), which can be used in the following platforms:
Cisco 7200 series routers—which consist of the 2-slot Cisco 7202, 4-slot Cisco 7204 and
Cisco 7204VXR, and the 6-slot Cisco 7206 and Cisco 7206VXR
Cisco uBR7246 universal broadband router
Second-generation Versatile Interface Processor (VIP2) in all Cisco 7500 series routers and in
Cisco 7000 series routers using the 7000 Series Route Switch Processor (RSP7000) and 7000
Series Chassis Interface (RSP7000CI) installed.
Contents
The following sections are included in this document:
If You Need More Information, page 2
Port Adapter Installation Prerequisites, page 2
What Is the 5EFL Port Adapter?, page 8
VIP2 and the 5EFL Port Adapter, page 11
Cisco 7200 Series and the 5EFL Port Adapter, page 25
The section “Cisco Connection Online,” on page 38, includes general reference information.
78-3158-04