Filter
Top Products
3
Upgrade Guide to Release 5.2.180.0 for Cisco Digital Media Encoder 2000
OL-13987-01
Performing the Upgrade
Performing the Upgrade
Caution Do not manually restart a DME while an upgrade is in progress. It will restart automatically after the
upgrade is finished.
After you have completed all of the tasks in the “Preparing to Upgrade” checklist, you can start to
upgrade your DME 2000.
Step 1 On a PC that uses Windows XP, do the following:
a. Double-click the My Network Places desktop icon, then double-click the network place association
to your DME.
b. When you are prompted to log in to your DME 2000, enter the username niagara and the
password password.
c. Copy the upgrade file from the network server or share point where you saved it to the root folder
of the D: drive on your DME.
Step 2 Using the keyboard and mouse that you attached to your DME, do the following:
a. To confirm that the upgrade file was copied successfully to the root folder of the DME D: drive, open
the D: drive folder.
b. Double-click the upgrade file.
c. If you see a security warning message like this one, click Run: