Cisco Systems 2950 Switch User Manual


 
Corporate Headquarters:
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Regulatory Compliance and Safety Information
for the Catalyst 2950 Switch
Read this document before installing or servicing the Catalyst 2950 switch.
Note Only trained and qualified service personnel (as defined in IEC 60950 and AS/NZS 3260) should install,
replace, or service the equipment. Install the system in accordance with the U.S. National Electric Code
if you are in the United States.
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
This document includes the following sections:
Translated Safety Warnings, page 2
European Directives, page 38
Regulatory Standards Compliance, page 39
EMC Environmental Conditions for Products Installed in the European Union, page 41
EMC Class A Notices and Warnings, page 41
Long-Reach Ethernet (LRE) Caution Statements, page 46
Related Documentation, page 47
Obtaining Documentation, page 47
Obtaining Technical Assistance, page 49