13
Installing the Cisco Content Engine 510 and 565
78-14731-02
Operating Specifications
Electrical input • Sine-wave input (47–63 Hz) required
• Input voltage low range:
–
Minimum: 100 VAC
–
Maximum: 127 VAC
• Input voltage high range:
–
Minimum: 200 VAC
–
Maximum: 240 VAC
• Input kilovolt-amperes (kVA), approximately:
–
Minimum: 0.087 kVA
–
Maximum: 0.150 kVA
Ports
• 10BASE-T, 100BASE-TX, 1000BASE-TX (dual) Ethernet ports
• Serial port
• 2 USB
1
ports
• Ultra160 SCSI port (CE-565 only)
• Fibre Channel port (on optional card)
• MPEG A/V decoder port (on optional card):
–
3 BNC
2
connectors for YUV, RGB
3
, and composite video output
–
Mini-XLR 8-pin connector for S/PDIF
4
and analog stereo audio
output
–
Mini-XLR 8-pin connector for VGA
5
output
Temperature
• Content Engine on: 50 to 95°F (10 to 35°C)
• Content Engine off: –40 to 140°F (–40 to +60°C)
Humidity
• Content Engine on: 8 to 80%
• Content Engine off: 8 to 80%
Altitude Maximum altitude: 6500 ft (2000 m)
Acoustical noise
emissions
• Sound power, idling: 6.5 bel maximum
• Sound power, operating: 6.5 bel maximum
1. USB = Universal Serial Bus
2. BNC = Bayonet-Neill-Concelman
3. RGB = red green blue
4. S/PDIF = Sony/Phillips Digital Interface
5. VGA = video graphics array
Table 1 Content Engine 510 and 565 Operating Specifications (continued)
Specification Description