Filter
Top Products
7
Installing the Cisco Content Engine 510 and 565
78-14731-02
Description
Description
This document describes the following Content Engine models:
The Content Engine 510 and 565 are configured for AC-input power and have a single AC-input power
supply.
Your Content Engine comes with an integrated dual-port Ethernet controller. This controller provides an
interface for connecting to 10-Mbps, 100-Mbps, or 1000-Mbps networks.
The Content Engine has two 10BASE-T/100BASE-TX/1000BASE-TX Ethernet ports with RJ-45
receptacles. Both Ethernet ports support autodetect speed mode and full-duplex operation, which
enables simultaneous transmission and reception of data on the Ethernet LAN.
In addition, the Content Engine 565 is configured with one Ultra320 low voltage differential (LVD)
Small Computer System Interface (SCSI) connector for attaching the Cisco Storage Array. The SCSI
adapter card is installed in PCI slot 2.
Figure 2 calls out the locations of the slots, ports, and receptacles on the Content Engine back panel.
Model Product Number
Content Engine 510 CE-510A-80GB-K9
CE-510A-160GB-K9
Content Engine 565 CE-565A-72GB-K9
CE-565A-144GB-K9