Filter
Top Products
9
Installing the Cisco Content Engine 510 and 565
78-14731-02
Installation Prerequisites
Installation Prerequisites
Consider the following prerequisites before installing your Content Engine.
Tools and Parts Required
A sliding rail rack-mount kit and cable management assembly are included in your shipping container
accessory box. The rack-mount kit is suitable for mounting Content Engine 510 and 565 units in 19-inch
(48.26-cm) 4-post equipment racks.
Note A 2-post rack-mounting option contains angle brackets for attaching the chassis to a 2-post rack.
You need the following tools for the installation:
• Flat-blade screwdriver
• Phillips screwdriver
Figure 5 shows the parts that you need to install the Content Engine in an equipment rack. If any parts
are missing or damaged, contact your place of purchase.
Figure 5 Rack Installation Kit
83198
1
2
3
4
5
6
7