Filter
Top Products
Chapter 2 Configuring User Profiles and CSS Parameters
Boot Configuration Mode Commands
2-14
Cisco Content Services Switch Basic Configuration Guide
78-11424-03
Specifying the Secondary Boot Configuration
Use the secondary command to specify the secondary boot configuration. The
secondary boot configuration is used when the primary configuration fails. The
options for this boot mode command are:
• secondary boot-file - Specify the secondary boot file
• secondary boot-type - Specify the boot method, local disk or FTP
• secondary config-path - Specify the path to a network configuration using
FTP
For more information on these options and associated variables, refer to the
following sections.
Specifying the Secondary Boot-File
Use the secondary boot-file command to specify the secondary boot file that the
CSS uses when the primary boot configuration fails. Enter the boot file as an
unquoted text string with no spaces and a maximum length of 64 characters.
To specify the secondary boot filename, enter:
(config-boot)# secondary boot-file ap0410008
To display a list of secondary boot filenames, enter:
(config-boot)# secondary boot-file ?
To remove the secondary boot file, enter:
(config-boot)# no secondary boot-file