Cisco Systems ME-C6524GS-8S Switch User Manual


 
Americas Headquarters:
© 2006–2007 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Regulatory Compliance and Safety Information
for the Cisco ME 6500 Series Ethernet Switch
Read this document before installing or servicing the following systems:
ME-C6524GS-8S(=)
ME-C6524GT-8S(=)
Note Only trained and qualified service personnel (as defined in IEC 60950-1 and AS/NZS 60950) should
install, replace, or service the equipment. Install the system in accordance with the U.S. National Electric
Code if you are in the United States.
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
This document includes the following sections:
Translated Safety Warnings, page 2
European Directives, page 33
California Perchlorate Contamination Prevention Act (Title 22, California Code of Regulations,
Chapter 33), page 35
EMC Environmental Conditions for Products Installed in the European Union, page 37
EMC Class A Notices and Warnings, page 38
Optional Cautions, page 40
Obtaining Documentation, page 40