Cisco Systems OL-10663-02 Server User Manual


 
885
Cisco Unified Communications Manager Express System Administrator Guide
OL-10663-02
Configuring Presence Service
Last Updated: November 26, 2007
This module describes presence support in a Cisco Unified Communications Manager Express
(Cisco Unified CME) system.
Finding Feature Information in This Module
Your Cisco Unified CME version may not support all of the features documented in this module. For a
list of the versions in which each feature is supported, see the “Feature Information for Presence Service”
section on page 905.
Contents
Prerequisites for Presence Service, page 885
Restrictions for Presence Service, page 886
Information About Presence Service, page 886
How to Configure Presence Service, page 887
Configuration Examples for Presence, page 900
Additional References, page 903
Feature Information for Presence Service, page 905
Prerequisites for Presence Service
Cisco Unified CME 4.1 or a later version.
Cisco Unified IP Phones 7911G, 7941G, 7941GE, 7961G, 7961GE, 7970G, and 7971GE require
firmware load 8.2(1) or a later version.