Cisco Systems (VIP6-80) Network Card User Manual


 
8
Versatile Interface Processor (VIP6-80) Installation and Configuration Guide
OL-5078-01
PA-2FE-FX Dual-Port Fast Ethernet 100BaseFX 2 Single
PA-4E Ethernet 10BaseT 4 Single
PA-8E Ethernet 10BaseT 8 Single
PA-F-MM FDDI Multimode 1 Single
PA-F-SM FDDI Single-Mode 1 Single
PA-FD-MM FDDI Full Duplex Multimode 1 Single
PA-FD-SM FDDI Full Duplex Single-mode 1 Single
PA-4T+ Serial, Enhanced 4 Single
PA-8T-V35 Serial, V.35 8 Single
PA-8T-232 Serial, RS232 8 Single
PA-8T-X21 Serial, X.21 8 Single
PA-T3/PA-T3+ T3 Serial Interface 1 Single
PA-2T3/ PA-2T3+ T3 Serial Interface 2 Single
PA-E3 E3 Serial Interface 1 Single
PA-2E3 E3 Serial Interface 2 Single
PA-4E1G/75 E1 G.703 Serial (75 ohm/Unbalanced) 4 Single
PA-4E1G/120 E1 G.703 Serial (120 ohm/Balanced) 4 Single
PA-MC-T3 Multichannel T3 1 Single
PA-MC-E3 Multichannel E3 1 Single
PA-MC-2T1 Multichannel DS1/PRI T1 (100 ohm) 2 Single
PA-MC-4T1 Multichannel DS1/PRI T1 (100 ohm) 4 Single
PA-MC-8T1 Multichannel DS1/PRI T1 (100 ohm) 8 Single
PA-MC-2T3+ Multichannel with two T3 interfaces 2 Single
PA-MC-8DSX1 Multichannel DS1/PRI T1 (100 ohm) 8 Single
PA-MC-2E1/120 Multichannel E1 with G.703 120-ohm interface 2 Single
PA-MC-8E1/120 Multichannel E1 with G.703 120-ohm interface 8 Single
PA-MC-STM-1MM Multichannel STM-1 Port Adapter 1 Single
PA-MC-STM-1SMI
1
Multichannel STM-1 Port Adapter 1 Single
PA-H HSSI 1 Single
PA-2H HSSI 2 Single
PA-SRP-OC12MM
2
Multimode fiber 2 Dual
PA-SRP-OC12SMI
2
Single-mode fiber, intermediate reach 2 Dual
PA-SRP-OC12SML
2
Single-mode fiber, long reach 2 Dual
PA-SRP-OC12SMX
2
Single-mode fiber, extended reach 2 Dual
1. Supported only on the Cisco VIP6-80.
2. Requires Cisco IOS 12.1(12)E or later or Cisco IOS 12.1(22)S or later.
Table 4 Port Adapters Supported by the VIP6-80 (Continued)
Product Number Description
Number of
Ports
Single or
Dual Width