Cisco Systems XR 12000 SIP-401 Webcam User Manual


  Open as PDF
of 12
 
HC-115
Cisco IOS XR Interface and Hardware Component Configuration Guide
Configuring Serial Interfaces on Cisco IOS XR
Software
This module describes the serial interfaces on routers supporting Cisco IOS XR software. Before you
configure a serial interface, you must configure the clear channel T3/E3 controller or channelized
T1/E1controller (DS0 channel) that is associated with that interface.
Feature History for Configuring Serial Controller Interfaces
Contents
• Prerequisites for Configuring Serial Interfaces, page HC-116
• Information About Serial Interfaces, page HC-116
• How to Configure Serial Interfaces, page HC-121
• Additional References, page HC-124
Release Modification
Release 3.3.0 This feature was introduced on the Cisco XR 12000 Series Router.
Support was added on the Cisco XR 12000 Series Router for the following
hardware:
• Cisco XR 12000 SIP-401
• Cisco XR 12000 SIP-501
• Cisco XR 12000 SIP-601
Support was added on the Cisco XR 12000 Series Router for the following
SPAs:
• 2-Port and 4-Port Channelized T3 Serial SPA
• 2-Port and 4-Port T3/E3 Serial SPA
next