Chipset and Mainboard information
2 - 11
PC Card Chipset - PCI1410
– The PCI1410 supports the following features:
– Ability to wake from D3 hot and D3 cold
– Fully compatible with the Intel 430TX (Mobile Triton II) chipset
– A 144-Pin Low-Profile QFP (PGE), 144-ball MicroStar Ball Grid Array (GGU) package, or
209-ball MicroStar Ball Grid Array (GHK) package
– 3.3-V core logic with universal PCI interfaces compatible with 3.3-V and 5-V PCI signaling
environments
– Mix-and-match 5-V/3.3-V 16-bit PC Cards and 3.3-V CardBus Cards
– Single PC Card or CardBus slot with hot insertion and removal
– Burst transfers to maximize data throughput on the PCI bus and the CardBus bus
– Parallel PCI interrupts, parallel ISA IRQ and parallel PCI interrupts, serial ISA IRQ with
parallel PCI interrupts, and serial ISA IRQ and PCI interrupts
– Serial EEPROM interface for loading subsystem ID and subsystem vendor ID
– Pipelined architecture allows greater than 130M bps sustained throughput from CardBus-to-
PCI and from PCI-to-CardBus
– Interface to parallel single-slot PC Card power interface switches like the TI TPS2211
– Up to five general-purpose I/Os
– Programmable output select for CLKRUN
– Five PCI memory windows and two I/O windows available to the 16-bit PC Card socket
– Two I/O windows and two memory windows available to the CardBus socket
– Exchangeable Card Architecture (ExCA) compatible registers are mapped in memory and I/
O space
– Intel 82365SL-DF and 82365SL register compatible
– Distributed DMA (DDMA) and PC/PCI DMA