Filter
Top Products
Disassembly
2 - 10 Removing the System Memory (RAM)
2.Disassembly
Removing the System Memory (RAM)
The computer has two memory sockets for 200 pin Small Outline Dual In-line Memory Modules (SO-DIMM) DDR III
(DDR3) supporting 667/800 MHz. The main memory can be expanded up to 6GB. The SO-DIMM modules supported
are 1024MB and 2048MB DDR Modules. The total memory size is automatically detected by the POST routine once
you turn on your computer.
Memory Upgrade Process
1. Turn off the computer, and turn it over and remove the battery (page 2 - 5).
2. Locate the memory (RAM) bay cover and remove screws - .
3. Lift off the bay cover .
4. Remove screws - from the RAM fan, and disconnect the fan cable .
5. Remove the RAM fan unit .
Figure 6
RAM Module
Removal
a. Remove the screws.
b. Lift off the bay cover.
c. Remove the screws
and disconnect the
fan cable.
d. Remove the RAM
fan.
Caution
The heat sink, and
CPU area in general,
contains parts which
are subject to high tem-
peratures. Allow the
area time to cool before
removing these parts.
11. Bay Cover
16. RAM Fan Unit
•13 Screws
1 10
11
12 14 15
16
a. c.
1
3
2
45
7
6
89
10
12
14
13
16
11
B.
d.
15