Cognitive Solutions A760 Printer User Manual


 
Chapter 3: Setting up the Printer 21
A760-D100 10/04 189-9200303 Rev. D A760 Two-Color Thermal/Impact Hybrid Printer: User Guide
Connect the cables
Cable connections are made at the back of the printer.
Note: Connector panel varies with printer configuration (parallel and ethernet connector versions not shown.)
Cash drawer cables
Warning! When instructed to connect the USB cable from the host to the
printer, be careful to plug it into the USB board connector only (A).
Do not insert the USB cable into the Cash Drawer connector (B) on the
left back of the printer. Damage to the printer could occur. If you are not sure
of your printer configuration, contact TPG, Inc. before proceeding.
USB
connector
RS-232C communication
connector
(9-pin shown)
Power
supply
connector
Back of printer
P
arallel & Ethernet
c
onnectors not shown
Strain
relief
DIP
switches
Cash drawer
connector
CAUTION:
DO NOT plug the
USB cable here.
The cash drawer cable connects the printer to one or
two cash drawers.
Warning! Be careful to connect correct cable into
printer cash drawer connector.
1 Plug the cable into the cash drawer connector
(standard phone jack) located at the rear of the
printer.
Note: If your system has two cash drawers, attach a
Y-cable to the printer’s cash drawer connector as
shown.
Printer
Y-cable
Cash
drawer
Cash
drawer
Printer connector
(standard phone jack)
Caution: Connect the cables to the printer before applying power.
The host computer should always be turned off before connecting communication cables.