Filter
Top Products
A760-D100 10/04 189-9200303 Rev. D A760 Two-Color Thermal/Impact Hybrid Printer: User Guide
Chapter 4: Using the Printer 27
¦
PAY TO TH
E
ORD
ER OF
$
DOLLARS
19
M
E
M
O
2001
SAMPLE
Slip
table
Extended
slip table
¦
PAY TO THE
ORDER OF
$
DOLLARS
19
MEMO
2001
Check orientation
Check
guide
Green
slip-in LED
First line of
print guide
Front cover
(non-flip model)
Chapter 4: Using the Printer
Printing on forms or checks
There are several types of transactions that may require
the insertion of a form or check into the printer:
• Credit card transaction (requiring a merchant
verification or authorization slip)
• Multiple-part forms such as credit transactions or
merchandise returns
• Electronic funds transfers
• Electronic check
• Check printing (printing the date, payee, and amount
on the check face)
• Check endorsement
Although the illustration below shows a check being
inserted into the printer, these instructions apply to
any type of form. The A760 can print on forms up
to five parts thick.
To print on a form or check:
1 Insert the form or check (check shown in the
illustration) from the front and place it on the slip
table with the print side up. If the form is extra long,
you may need to insert it from the side. A slight
resistance may be felt when the form comes in contact
with the form stop.
2 Slide the form or check to the right until it aligns
against the check guide.
3 Slide a short form or check toward the back of the
printer until it contacts the form stop (it will not be
able to go any further).
For a long form, position it appropriately using the
first line of print guide on the left side of the printer.
The green slip-in LED on the slip table turns on when
the form or check is properly inserted (the form has to
cover two sensors on the slip table).
4 Follow the instructions from the host computer. The
printer begins printing.
5 Remove the form or check after it has been fed back
out.
6 Follow the instructions from the host computer to
finish the transaction.