Filter
Top Products
Chapter 4: Using the Printer38
A760 Two-Color Thermal/Impact Hybrid Printer: User Guide 189-9200303 Rev. D A760-D100 10/04
Printer settings and functions
To change the printer settings and functions, enter the configuration menu, select the sub-
menu from the main menu and answer the questions printed on the receipt until you come to
the instructions for selecting the printer settings.
Caution: Be extremely careful changing any of the printer settings to avoid inadvertently
changing other settings that might affect the performance of the printer.
Note: If it becomes necessary to clear lasting printer tallies,
please contact an TPG, Inc. representative for instructions.
Press the paper feed button as instructed to select the printer settings you want.
Select the emulation/software options sub-menu to set:
• Printer ID mode
This function is used to determine what printer ID
value is returned in response to a Transmit printer ID
command (1D 49 n) when the printer is in A756
emulation mode. The printer can be configured to
send back the ID of the A760, A758 or A756.
• Default lines per inch
This function allows you to set the default for lines
per inch to either:
8.13 lines per inch
7.52 lines per inch
6.77 lines per inch
6.00 lines per inch
• Carriage return usage
This function allows the printer to ignore or use the
carriage return (hexadecimal 0D) command
depending on the application. Some applications
expect the command to be ignored while others use
the command as a print command.
• Default font
Sets the default font for monochrome, two-color, and
Application Compatible Escape Commands
emulations.
• Font size
Allows user to set font size for the emulation being
used.
• Slip position (MICR printers)
This function is used by manufacturing to align
the carriage.
• Slip eject at receipt select
When enabled the printer ejects the slip when receipt
is selected.