Filter
Top Products
Appendix A: USB Driver Installation 59
A760-D100 10/04 189-9200303 Rev. D A760 Two-Color Thermal/Impact Hybrid Printer: User Guide
Check the installation
After you are finished installing the drivers, you should check to make sure they were installed correctly.
Windows 95/98/Me/XP/2000
1 Open the Device Manager window, as you did when
initially checking for USB support.
2 Scroll down to Universal Serial Bus controllers.
The following devices should be displayed:
• TPG, Inc. A758 Printer
• TPG, Inc. A758 Serial Ports [Port–#] (# is a number
indicating the location of the port)
Note: The TPG, Inc. A758 is a monochrome-only
thermal receipt printer. The TPG, Inc. A758 and A760
both use the same USB controller.
3 Scroll up to Ports.
4 You should see a COM number and port description
for the TPG, Inc. printer.
If the drivers are missing or are incorrectly listed,
the installation was not successful. Install the
drivers again.
Windows NT
1 Go to the Windows Start button and select
Programs>InsideOut Networks Utilities>Edgeport
Configuration Utility.
2 A window opens up that should contain the name of
the printer and the port assignment.
If this information is not listed, the installation was not
successful. Install the drivers again.