Filter
Top Products
Support for up to 4096 MB of 667-MHz DDR2 SDRAM
Two DIMM slots
DIMM sizes supported: 512 MB, 1024 MB, and 2048 MB
Standard Memory
512 MB (512 MB x 1)
1024 MB (1024 MB x 1 or 512 MB x 2)
2048 MB (2048 MB x 1 or 1024 MB x 2)
4096 MB (2048 MB x 2)
Optional Memory
Upgrades
Support for up to 4096 MB of memory is available (with the installation of optional DDR2 SDRAM
memory kits). Both memory slots are user accessible. Please refer to the Hardware and Software
Guide for installation procedures. Maximized dual-channel performance requires SODIMMs of the
same size and speed in both memory slots.
Up to
Slot 1 Slot 2
1024 MB 1024 MB
Empty
1024 MB
512 MB 512 MB
1536 MB 1024 MB
512 MB
2048 MB 1024 MB 1024 MB
4096 MB 2048 MB 2048 MB
NOTE:
This chart does not represent all possible memory configurations. Due to the non-industry
standard nature of some third-party memory modules, we strongly recommend using only HP
branded memory modules to ensure compatibility. If you mix memory speeds, the system will
perform at the lower memory speed. Full availability of 4 GB of memory requires Windows Vista
Business 64-bit or Linux. With Windows 32-bit operating systems, the amount of usable memory
is dependent upon your configuration, so that above 3 GB all memory may not be available due
to system resource requirements.
Memory Upgrades
HP 512-MB (DDR2 667 MHz) SODIMM
EM993AA
HP 1024-MB (DDR2 667 MHz) SODIMM
EM994AA
HP 2048-MB (DDR2 667 MHz) SODIMM
EM995AA
QuickSpecs
HP Compaq 6710b Notebook PC
Memory
DA - 12685 Worldwide QuickSpecs — Version 12 — 3/18/2008
Page 13