Filter
Top Products
External Device Connections
Hardware Guide 7–7
Modem models will need an RJ-11 cable. To connect the cable:
1. Plug one end of the RJ-11 cable into the RJ-11 jack on the
computer. If the RJ-11 cable contains a noise suppression
circuit, which prevents interference with TV and radio
reception, orient the cable so that the noise suppression
circuitry is closest to the computer.
2. Plug the opposite end of the cable into a standard telephone
wall jack. Or, if applicable, plug the opposite end of the cable
into the phone plug adapter, which then plugs into the wall
jack. Some countries may require an adapter to connect the
modem to the telephone wall jack.
The NIC models will need an RJ-45 cable. To connect the cable:
1. Plug one end of the RJ-45 cable into the RJ-45 jack on the
computer.
2. Connect the other end of the cable into the network jack.
To find additional modem and NIC information, refer to the
following documents:
■ Modem and Networking guide on the Notebook Products
Reference Library CD for configuring the modem and
installing software.
■ Modem Commands on the Notebook Products Reference
Library CD for AT Commands, including dial modifiers and
instructions.