Filter
Top Products
Connecting To The World 4-5
Networking Your PCs
Connecting Your
Internet PC
to an Ethernet
Network
(available on
select models)
Your Compaq Internet PC may be equipped with a 10/100 Mbps network interface
adapter and its associated driver. For the exact location of the Ethernet connector,
refer to the Compaq Presario Quick Setup poster that came with your computer.
+
If your Internet PC is equipped with a Home Phoneline network adapter, refer to the
Home Networking Feature Guide
for information on setting up a Home Phoneline
network.
Setting Up a
Network
You must physically connect the computers, install the network protocols, and enable
file and print sharing.
Hardware Requirements
To physically connect computers via an Ethernet, you must have the following:
◆ at least two computers with RJ-45 Ethernet connectors
◆ a 10BaseT or 10/100 Ethernet hub
◆ Category 5 Ethernet cable
HINT:
The
Network Neighborhood
K
icon will not appear on the Windows desktop
until the network protocols are installed.
`
CAUTION:
You should never share your Windows folder or any of its subfolders or files. The
accidental deletion of any Windows file can prevent your computer from operating properly. If
you choose to share your entire hard drive carefully consider the type of access you will
allow.
Hardware Installation
Connect the computers by inserting the cable into the Ethernet connectors on each
computer. Refer to the hub manufacturer documentation for instructions on
connecting the cables to the hub.
Installing the Network Protocols
To install the necessary network protocols, complete the following steps:
1. From the Windows Taskbar, click Start, point to Settings, then click Control
Panel.
2. Double-click the Network
L
icon.
3. When the message Your network is not complete. Do you want to continue?
is displayed, click Ye s.