Filter
Top Products
5–32 Maintenance and Service Guide
Removal and Replacement Procedures
5.15 Hard Drive
Ä
CAUTION: To prevent damage to the computer and hard drive and
loss of information, shut down the computer before removing the
hard drive from the computer. Do not remove the hard drive while
the computer is on, in Suspend (Standby), or in Hibernation. If you
are not sure whether the computer is in Hibernation, turn the
computer on, then shut it down. If the computer is running a retail
version of a Windows operating system, shut down the computer
before removing any drive.
1. Prepare the computer for disassembly (Section 5.3) and, in
the order below, remove the following components:
❏
LED cover (Section 5.6)
❏
Keyboard (Section 5.7)
❏
Optical drive (Section 5.8)
❏
Display (Section 5.9)
❏
Heat sink (Section 5.10)
❏
Top cover (Section 5.12)
Hard Drive
Spare Part Number Information
Hard drives
20 GB hard drive
15 GB hard drive
10 GB hard drive
253596-001
253595-001
233554-001
Hard drive bracket (included in Hardware kit) 234005-001
238850-003.book Page 32 Friday, December 21, 2001 2:53 PM