Filter
Top Products
Power Cord Set Requirements
Maintenance and Service Guide B–3
Notes
1. The flexible cord must be <HAR> Type HO5VV-F,
3-conductor, 1.0 mm
2
conductor size. Power cord set fittings
(appliance coupler and wall plug) must bear the certification
mark of the agency responsible for evaluation in the country
where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18
AWG, 3-conductor. The wall plug must be a two-pole
grounding type with a NEMA 5-15P (15A, 125V) or
NEMA 6-15P (15A, 250V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear
a “T” mark and registration number in accordance with the
Japanese Dentori Law. The flexible cord must be Type VCT
or VCTF, 3-conductor, 1.00mm
2
conductor size. The wall
plug must be a two-pole grounding type with a Japanese
Industrial Standard C8303 (7A, 125V) configuration.
238850-003.book Page 3 Friday, December 21, 2001 2:53 PM