Compaq F500 Laptop User Manual


 
3. Lift the left side of the cover (2) and swing it to the right.
4.
Remove the memory module compartment cover.
NOTE: The memory module compartment cover is included in the Plastics Kit, spare part
number 442891-001.
5. Spread the retaining tabs (1) on each side of the memory module socket to release the memory
module. (The edge of the module opposite the socket rises away from the computer.)
6. Remove the memory module (2) by pulling it away from the socket at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into
the memory module socket.
7. Remove the memory module.
Reverse this procedure to install a memory module.
32 Chapter 5 Removal and replacement procedures