Filter
Top Products
RTC battery
Description Spare part number
RTC battery 602745-001
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 52).
5. Remove the following components:
a. Hard drive (see
Hard drive on page 53)
b. WLAN (see
WLAN module on page 58)
c. Optical drive (see
Optical drive on page 56)
d. Keyboard (see
Keyboard on page 63)
e. Top cover (see
Top cover on page 65)
f. Speaker assembly (see
Speaker assembly on page 68)
g. Display assembly (see
Display assembly on page 76)
h. System board (see
System board on page 83)
Remove the RTC battery:
1. Turn the system board upside down.
2. Release the RTC battery from the clips on the system board (1).
ENWW Component replacement procedures 89