Filter
Top Products
Removal and replacement procedures
Maintenance and Service Guide 4–23
7. If it is necessary to replace any of the display assembly internal components, remove the two round Mylar
screw covers 1 on the display bezel bottom edge. The screw covers are included in the Display Rubber Kit,
spare part number 530999-001.
8. Remove the two Phillips PM2.5×6.5 screws 2 that secure the bezel to the display assembly.
9. Flex the inside of the top and bottom edges 1 and the left and right sides 2 of the display bezel until it
disengages from the display enclosure.
10. Remove the display bezel 3. The bezel is available using one of the following spare part numbers:
❏ 530992-001—with webcam and microphone, for use with the HP G61
❏ 534993-001—with webcam and microphone, for use with the CQ61
❏ 534992-001—with microphone only, for use with the HP G61
❏ 534995-001—with microphone only, for use with the CQ61