Filter
Top Products
E-53
Specifications
*
1
USB connectors are not guaranteed to work with all personal computers.
*
2
No USB cable is included with the iP-40BE’s PC connection cable.
*
3
The “iP Viewer Software Quick Reference” is not included with the iP-40BE.
*
4
Our optional SD memory card (model: SDSDC1GB) is guaranteed to operate. The other SD memory cards are not guaranteed to operate.
Before initializing (formatting) the SD memory card, be sure to turn off the power. The SD memory card initialized with the other units may not be usable.
When a great number of images have been stored, the saving/playback speed may become slower.
The SDHC standard SD memory card and high-speed 3D memory card (Class 6) are not supported.
• Specications and designs are subject to change without prior notice in order to improve the product.
The specications are subject to change without notice.
Model Name iP-40SE/iP-40BE
Type Single-plate DLP ® color wheel color separation type
Main Part
Specication
DLP ® chip
Size 0.7” DLP ® chip x 1, aspect ratio 4:3
Number of Pixels 786,432 pixels (1,024 x 768 dots)
Projection Lens F2.6 to 2.9, f = 25.8 to 30.0 mm, zoom ratio 1.16
Optical Source 200W Super High-pressure Mercury Lamp
Image Size 33-300 inches diagonal (projection distance 1.3 to 11.3 m)
Color Reproducibility Full color (16,770,000 colors)
Brightness 2500 ANSI lumens
Scan Frequency (analog RGB) Horizontal 24.8 to 68.7 kHz, Vertical 50 to 85 Hz
Maximum Resolution At RGB signal input 1,024 x 768 dots (Compressed display of 1,280 x 1,024 dots is possible.)
Video Input
OHP (actual object
projection unit)
Scanner 4.13 million pixel color CCD camera
Scanning size 288 mm x 216 mm (11.3 in x 8.5 in)
PC
(Analog RGB Input)
Signal system Separate Signal System
Video signal Analog: 0.7Vp-p/75Ω
Sync Signal
Separate/composite: TTL Level (positive/negative)
Sync on green: 0.3 Vp-p (Negative)
Terminal Panel 15 pin Mini D-sub 1 ch
Video
Signal system NTSC/PAL/SECAM/PAL-N/PAL-M/NTSC4.43
Input Terminal RCA Pin Jack 1 ch
Component
video input *
1
Signal system
Y: Y: 1.0Vp-p/75Ω (with sync), Cb-Cr: 0.7Vp-p/75Ω
D1/D2/D3/D4
Input Terminal 15-pin Mini D-SUB x 1
Audio Input
PC
Audio Signal 0.4Vrms/47KΩ
Input Terminal Stereo Mini Jack 1 ch
Video
Audio Signal 0.4Vrms/47KΩ
Input Terminal RCA Pin Jack 1 ch
Video/component
video *
1
Audio Signal 0.4Vrms/47 kΩ
Input Terminal RCA (L/R) pin-plug jack x 1
USB Connector*
1
1 system USB connector (Mini B type) USB 2.0
Scanner output Exit JPEG (2.272 x 1704 dots)
Memory interface SD memory card*
4
/slot (format: FAT16)
Audio Output 2W monaural
Operating Range of Temperature and Humidity Temperature: 0 to 35°C (32 to 95°F), humidity: 20 to 80% (no condensation)
Power Source 100-120 / 220-240V AC , 50/60 Hz
Power Consumption 310W (100-120V AC), 300W (220-240V AC)
Input Current 3.1A (100-120V AC), 1.6A (220-240V AC)
External Dimensions (mm/in)
290 (W) x 360(D) x 123(H) / 12.2 (W) x 15.9(D) x 5.5(H)
(not including protrusions, Including the cover)
Weight 5kg / 12.3lbs
Accessories*
2
Power Cable (3 m/3.3 yd), Remote Control, User's Manual, Battery (Coin-type lithium battery:
CR2025), PC cable, Lens cap, iP Viewer Software Quick Reference
Regulation
Meets FCC Class A requirements
Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3)
Options
D terminal/RGB conversion cable (model name IPC-D/VGA)
SD memory card (model: AV-SDSDC1GB)