Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . .
10-2 Running Computer Setup
Writer: Betty Fessenden - Saved by: BLF - Saved date: 6/6/96
Part Number: 213569-001 - File name: CH10
Initialization Menu
Use the Initialization menu to set the date and time, to change the
language for Computer Setup, and to change the factory-default
settings for the following options:
Option Default
Power-On Memory Test Disabled
Keyboard Num Lock Disabled
Diskette Boot Enabled
Drive Boot Sequence Notebook Hard Drive Bay
MultiBay - Notebook
MultiBay I - Expansion Base
MultiBay II - Expansion Base
Boot Display Auto
Diskette Boot can be set either on this menu or on the Security
menu.
The drive boot sequence sets the order in which the system
searches for a bootable drive to start the computer. Refer to Chapter
6, "Working with Removable Drives", for information on changing
the drive boot sequence.
The default boot display setting, Auto, allows the computer to
automatically detect and adjust the resolution whenever an external
monitor is connected or disconnected.
The language setting changes the language for Computer Setup.
You can change it to any one of the six languages as often as
needed.