Compaq LTE 5000 Laptop User Manual


 
. . . . . . . . . . . . . . . . . . . . . . . . .
Working with Removable Drives 6-11
Writer: Betty Fessenden - Saved by: BLF - Saved date: 6/17/96
Part Number: 213660-001 - File name: CH6
Computer MultiBay
The following procedures describe inserting and removing drives
from the computer MultiBay. The procedures are similar to insert
drives into and remove drives from the expansion base MultiBays.
One difference between the computer MultiBay and the expansion
base MultiBays is the provision to secure a drive in the computer
MultiBay. There are no provisions to secure drives in the expansion
base MultiBays.
Securing a Drive in the Computer MultiBay
Four security screws are supplied with the computer to secure
drives in the dedicated hard drive bay and the computer MultiBay
(two screws are spares). Insert one of the screws to help prevent
unauthorized removal of a drive that is in the computer MultiBay.
Use a flat-bladed or Torx T-8 screwdriver to insert the security
screw into the bottom of the computer as illustrated below. The
screw fits through a slot in the drive or the MultiBay Hard Drive
Carrier to hold it in place.
Securing a Drive in the Computer MultiBay